HOT STAMPING

It is possible to achieve the printing with high (metallic) gloss using the hot stamping . It is used for printing of gold or silver color. It is possible to produce so-called blind printing or printing of the hologram. The disadvantage is the inability of color combinations and their limited range compared to the other printing technologies.

Our references

Security elements for AUDI cars. Hot stamping ensures deep red color on the whole surface. Tens of thousands pcs / month. Red
Kelímek Ryor Gold stripes and gold Ryor logo on the cap of cosmetic tubs add a luxurious look. Series of about 50.000 pcs / month.

Buttons with black pattern of hot stamping. Hot stamping can create a relief, which is recognized by touch. Tlacitko

Co je horká ražba a jak funguje 

 Using the hot stamping we print plastics, leather, paper, wood. Transfer of print material is done using a high temperature and the foil is sealed to the subject up. The technology is not suitable for metal or glass.

Materials that can be printed

By the printing with hot stamping, the special foil is sealed in the product through the matrix in the form of a printing, which is heated to a high temperature. In the case of blind printing the print is done without the foil and the motive is actually branded into the product.

 

FLOCKING
SCREEN PRINTING
PAD PRINTING
HOT STAMPING
ENGRAVING

FLOCKING

Flocking is the high voltage coating of the polyamide fibres on the product´s surface. Its aim is to create a suede surface.

Our company disposes of a spraying automat which ensures by the serial processing that the adhesive will be applied in the same layer and at the same places.

SCREEN PRINTING

Screen printing is the most common technology used for printing on flat material. It is ideal for series of hundreds pieces above.
It is possible to print from the smallest motives to the prints of several meters. Our experiences in this field are extensive, we have been applying the screen printing since 1993.

PAD PRINTING

The pad printing works on the principle of color´s transferring through the pad. First of all, the print motive is etched into a special matrix. Then the paint is applied to the matrix and it is wiped with the sharp metal plate. Only the color in the etched part left. It is then applied on the silicone pad, which is a piece of flexible rubber, and from the pad on the object that should be printed. This technology is suitable for smaller surfaces, but due to shapeable pad there can be printed as well as surfaces that are not flat.

HOT STAMPING

It is possible to achieve the printing with high (metallic) gloss using the hot stamping . It is used for printing of gold or silver color. It is possible to produce so-called blind printing or printing of the hologram. The disadvantage is the inability of color combinations and their limited range compared to the other printing technologies.

ENGRAVING

Engraving is a technology, by which the motive that should be transferred to the product is created in a computer and using the special software it controls the machine tool that mills or graves the motive into the surface of the product with the diamond tip.
At present, our equipment enables us to process both 2D as well as 3D graphics and namely on products into the size of 2 x 3 m.

more...

FLOCKING

The surface of the product is covered with the PES fibres. They create the luxury, suede appearance.

1

SCREEN PRINTING

Printing of flat or rotary surfaces. Considerably more durable than etiquette.

2

PAD PRINTING

Printing of the smaller surfaces with more complicated shapes than by screen printing. It allows to print very fine motives.

3

HOT STAMPING

The foil is hot-pressed into the plastic. It is suitable for silver, gold and other bold colors.

4

ENGRAVING

Material´s processing with the high-speed miller that is controlled with the 3D computer.

5
I want to inquire / help
contact me

Jelinek s.r.o.
Svatopluka Cecha 492
Mnichovo Hradiste, 295 01
CZECH REPUBLIC

English speaking contact person at :
Mobile: +420 777 134 491
E-mail: info@jelineksro.cz

Working hours:
MO - FR: 7:00 - 15:30


Enter your inquiry or question

Here you can enter your inquiry or question. We will contact you as soon as possible.

If necessary, you can attach an image file.

(items marked * are mandatory and must be completed)

loading

Your file is beeing uploaded to the server.
Please wait.

Enter your contact data

Enter your request for nonbinding contact. We will contact you as soon as possible.

(items marked * are mandatory and must be completed)